Deuter Aircontact Lite 60+10 SL hiking bag

The Aircontact Lite 60+10 SL features the Air contact system that promotes back breathing. The back cushions are made of a special breathable functional foam with hollow compartments.
The parallel arrangement of the cushions in the Aircontact Lite range creates an additional ventilation channel.

The specificities of the Deuter Aircontact Lite 60+10 SL bag:

• Elastic front pocket
• Aircontact Lite back contact system with good load transfer for medium loads and excellent ventilation through open-pore functional foam
• Pull-forward adjustment, making it easy to tighten and adjust the bi-laminate and compact stabilizers on the hips, even when heavily loaded
• Vari-Quick fit system for all back lengths with double padding and optimized fit shape
• Ergonomic shoulder straps with Soft Edge soft edges
• Soft frames made of X-shaped multi-compartment aluminum profiles
• Separate bottom compartment
• Liftable flap
• flap pocket
• Interior compartment for valuables
• Zipped pocket on the stabilizer on the hips
• Flap fastening loops
• Attachment for ice ax and walking stick
• Large elastic side pockets
• Compression and position adjustment straps
• SOS label
• Double bottom
• Compatible with hydration systems
• Loops for helmet attachment (accessory)
• Compartment for wet clothes


Technologies used:

Air contact Lite System

• Adjustment straps allow exact positioning of the bag on the back. Thanks to a special "triglide" buckle, the position of the adjustment strap on the shoulder strap can be slightly offset. On Aircontact models from 50+10 SL, two attachment points placed at different heights make it possible to obtain the optimal angle of position adjustment straps when adjusting to back length.

• Coussins lombaires en mousse fonctionnelle à compartiment creux, spéciale et respirante: ce système de contact direct avec le corps permet à l'air de se renouveler à chaque mouvement grâce à un effet de pompe. Cela signifie 15% de transpiration de moins qu’avec un sac à dos ordinaire (résultat obtenu lors d’une étude de marché entreprise par Gabriel L.&T. en collaboration avec l’Université d’Erlangen).

• The ergonomic stabilizers on the hips are made of several layers. For better carrying comfort, the inner layer is made of soft foam covered with 3D AirMesh mesh. The stiffer foam outer layer maintains the ergonomic shape and shifts the load to the hips. Lateral compression straps on the stabilizers regulate load transfer and increase stability. On ACT Lite stabilizers, this bi-laminate construction is optimized to combine weight reduction and load distribution. Aircontact models designed for heavier loads optimize stability and load transfer thanks to polyethylene reinforcement between the foam layers.

• Ergonomic X frame made of crossed aluminum frames. This system, both flexible and stable, reacts to every movement of the body and transfers the load to the lumbar belt.

• Ergonomic 3D Air Mesh shoulder straps.

• Vari-Quick system for an ideal individual fit.

SL Women's Fit System

• Shorter backs
• Women have on average a shorter back than men. The carrying system of the SL models is therefore designed shorter than for the standard backpacks from Deuter.
• Narrower straps
• Soft-Edge edges on both sides, smaller buckles and very narrow shoulder strap ends prevent the straps from chafing at the armpits or compressing the chest. Also, the shoulder straps are closer together, to prevent them from slipping.
• Conical hip stabilizers.
• To perfectly fit the female hips, with their characteristic curve, the lumbar belt, once closed, must be conical in shape.
• This taper is obtained by the upward inclination of the opening point and the curved shape of the SL stabilizers arranged at hip level.
• The seat of the backpack is oriented towards the average sporty build. Not everyone conforms to the norm, so female models can be suitable for men, and vice versa. Specifically for larger volume backpacks, the seat must be perfect. If the original Vari-Quick shoulder straps are therefore not suitable, they can be exchanged for SL shoulder straps on standard backpacks and baby carriers from Deuter, all in a jiffy. Conversely, SL suspenders can be exchanged for standard Vari-Quick suspenders, which are more suitable for larger builds.