Petzl Swift LT headlamp

Spécificités de la lampe frontale Swift LT Petzl:

•Ultra light and compact, it fits in the palm of your hand.


• Optimized compactness and breathability, thanks to the thinness of the headband.
Its construction ensures good support on the head, while remaining comfortable to wear.


• Tilts up to see ahead when worn around the neck or tilts down when worn on a helmet.


• Fixed red lighting to preserve night vision and provide more reading comfort, without dazzling those around you.

• Intended for nature activities where every gram counts:
- see and be seen, thanks to a lighting power of 380 lumens
- wide and homogeneous beam allowing you to see comfortably within reach or at your feet
- three levels of white lighting: MAX BURN TIME (maximum autonomy), STANDARD (best power/autonomy balance) and MAX POWER (maximum power)
- reflective thread throughout the headband to remain visible even in low light
- 880 mAh lithium-ion battery, rechargeable via USB-C socket (charging cable not included), with charging indicator light
- indicator light when the lamp is turned on and off allowing you to check the battery level
- rain resistant (IPX4)

• Lightness, compactness and comfort:
- ultra light with only 43 g
- ultra compact, it fits in the palm of the hand
- ultra-thin headband for more compactness and breathability during dynamic activities. Its ergonomic construction makes it easy to adjust, while providing a good fit on the head and comfortable wearing. Entirely designed from recycled materials, the headband is removable, washable and replaceable.

• Ease of use:
- fixed red lighting to preserve night vision without dazzling those around you and flashing to signal your presence, particularly in case of emergency
- LOCK function to avoid accidental ignitions during transport/storage
- lamp can be tilted upwards to see ahead when worn around the neck or downwards when worn on a helmet
- compatible with HELMET ADAPT and BIKE ADAPT 2 bindings to install the lamp on all types of helmets or on a bicycle (*)

• Eco-design: the lamp is made of 50% bio-sourced or recycled materials

(*) Please note, this lamp is not certified for use on the road: when used in an area regulated by a highway code, Petzl lighting does not replace the mandatory standardized lighting.

• Lighting:

- for a short activity, favor the Max Power level to maximize the lighting power
- for an enduring or long activity, which requires good battery management, choose the Standard level which offers the best compromise between lighting power and battery life
- for an activity requiring little movement (bivouac, camping, reading), the Max Burn Time level with moderate lighting preserves the batteries or the battery

Wide beam for proximity lighting

This wide and low-power lighting allows you to see comfortably at your fingertips or at your feet.
It is ideal for looking at an object at a short distance (reading a map, making a tying knot or setting up a tent, for example).
The lighting automatically adapts to the distance of the object.


• Lighting performance according to ANSI protocol (American National Standard Institute):



Petzl follows the ANSI/PLATO FL 1 protocol to measure and communicate on the lighting power and the autonomy of its headlamps. This approach allows you to easily compare the performance of different models of headlamps from Petzl and other manufacturers who adopt this protocol, using the same benchmark.

• Lighting power (in lumens)

This measurement is carried out between 30 seconds and 2 minutes after lighting the lamp. It indicates the maximum power emitted, with new cells or batteries, when the lamp is started.

• Lighting distance (in meters)

This is the maximum distance between the lamp and the place where only 0.25 lux of illumination remains. The measurement is carried out on ignition with new cells or batteries. The lighting distance depends directly on the lighting power, but above all on the shape of the beam.

• Autonomy (in hours)

It corresponds to the duration during which the lighting is optimal, from the ignition of the lamp until reaching 10% of the maximum power. Below this power, we switch to the "lighting reserve" phase.

• The lighting reserve (in hours)

The lighting reserve guarantees minimum operating or safety lighting.